Correct Cable Junctions for Exterior & Landscape Lighting Installations
Use suitable Junction boxes at all times All cable (or conduit if used) connections and joins must be completed within suitably appropriate 3-way junction boxes using IP68 cable glands or adaptors. Either a round cable or round conduit must fully terminate into the junction box. An example of a suitable junction box is the LED Logical JB3003 shown in Fig 2. (optional installation accessory is available separately by request). Underground junction boxes should be internally filled using a suitable epoxy resin to fully encapsulate all cable joints. Metal cabinet or enclosure for control gear Control gear such as LED drivers, controllers should be neatly installed inside a metal electrical cabinet or dedicated metal enclosure. LED drivers or controllers should not be fitted inside any type of plastic enclosure as plastic does not provide appropriate thermal management.
Fig 2. JB3003 Junction Box
Copyright © LED Logical 2021. No permission is granted to copy, reproduce or edit this any part of this document without the express written consent of LED Logical. All rights reserved. This guide is for generic information purposes only. Please refer to your qualified architect, designer or electrical contractor before finalising any details regarding wiring and installation. www.ledlogical.com.
Powered by FlippingBook