EXTERIOR & LANDSCAPE

Correct Cable Junctions for Exterior & Landscape Lighting Installations

Flat cables are not acceptable

A flat cable on its own cannot be professionally terminated into a glanded junction box as required. Flat cable (including the use of figure-8 style cable) is unsuitable for outdoor installations unless it is used inside a round conduit which is then wholly terminated into to the junction box.

Electrical tape or heat-shrink is not acceptable

The use of any type of electrical tape or heat-shrink in outdoor wiring connections is not acceptable under any circumstances. These methods do not provide adequate long term integrity for areas where moisture is present. Only a suitable junction box, with properly terminated glands is acceptable.

Copyright © LED Logical 2021. No permission is granted to copy, reproduce or edit this any part of this document without the express written consent of LED Logical. All rights reserved. This guide is for generic information purposes only. Please refer to your qualified architect, designer or electrical contractor before finalising any details regarding wiring and installation. www.ledlogical.com.

Powered by