Industralight Australian lighting manufacturer inground lighting, pole lighting, streetlights solar lighting, LED downlights, exterior lighting, wall lighting, surface mounted led downlights, LED panels, LED battens high efficacy commercial lighting, hazardous area explosion proof lighting.
SOLAR & SPECIALTY LIGHTING
CATALOGUE
ABOUT INDUSTRALIGHT Industralight is an industry-leading supplier of professional lighting solutions. Our experienced team have delivered thousands of successful lighting installation across multiple industry sectors. This means you can trust us to supply the best products for your project.
OUR MISSION To provide the best and widest selection of quality lighting products for our clients. We focus on competitive pricing for all products, as well as maximum additional value for services, extra items, and free extended support for all clients.
Leverage our values, expertise and extensive product range to assure successful lighting outcomes for your project.
EVERY INDUSTRALIGHT PRODUCT IS COVERED BY WARRANTY
We know occasionally things can go wrong. That’s why every product we supply is backed by a replacement warranty. Extended warranty of up to 10 years is available for selected projects that are eligible and registered.
Contact Industralight or visit https://industralight.com.au/warranty/
WK800 TEMPORARY SITE LIGHTING SYSTEM
WK800 TEMPORARY SITE LIGHTING SYSTEM
PT200 Deployable portable lighting in one bespoke robust package.
Portable Light Tower
LIGHTER, BRIGHTER, FASTER DEPLOYMENT
Unfolding or folding just two steps, in under 10 seconds.
Secure the lamp at any height with the buckle.
Op�onal ground pegs are available to secure the lighthouse, providing wind and vibra�on resistance.
One keys to release tripod.
HUMANIZED DESIGN
Dual rainproof USB outputs for charging two devices at once, rain or shine. USB Output
Con�nue working while charging, the hook here can serve as a phone stand. Phone Stand
Plug the driver into the rainproof port to unloc maximum brightness and stepless dimming. Stepless Dimming
8+ Hours To Standard Mode Up
Ultra-long Endurance
2 type of ba�ery packs with different capaci�es have same contact slot.
Typical working hours 22 hours on Eco mode.
54BTA
Doubled typical working hours to 45 hours.
24BTA
Two Op�ons Available Single Head Or Brighter Dual-head Version
Dual-head
0-11,000LM Stepless Dimmable
AC
327Lux
Brightness
80Lux
20Lux
Turbo Standard Balanced Eco
5,000LM 3,000LM 1,800M 500LM
Battery (4 Mode)
5Lux
40m
20m
10m
5m
0m
* 'Brightness' represents the center point illuminance value of the lighting direct
Single Head
Turbo Standard Balanced Eco
3,000LM 2,000LM 1,200M 350LM
Battery (4 Mode)
AC Powered Up To
11,000 LM
Battery-powered Up To
5,000 LM
Construction
Maintenance
Infrastructure
Camping
Railway
Mining
Emergency
Sport
One person operation
2.3m
Less than 6Kg exclude battery.
1.0m
Specifications
PT200 Dual head
PT200 Single head
Hight Weight Power Supply Lumens Run Times IP Grade Output(USB)
Hight Weight Power Supply Lumens Run Times IP Grade Output(USB)
1m~2.3m 6.3Kg (Fitting only) D24 series battery pack / AC 100-277V 0 - 11,000Lm >8 hours (Standard mode, D24-100) IP65 5V 2A (2 Dock)
1m~2.3m 5.9Kg (Fitting only) D24 series battery pack 0 - 3,000Lm >8 hours ( Standard mode, D24-100) IP65 5V 2A (2 Dock)
Size (mm)
Package
Model
Single head
Dual head
Size of Carton
1070x240x300mm
1070x240x300mm
Gross Weight of Carton
585
7.2KG±5%
7.6KG±5%
PCS/Carton
1
1
TL-200 Single head
585
585
TL-200 Single head
TL-200 Dual head
TL-200 Dual head
toll-free: 1300 295 367 email:
mail@industralight.com.au sales reps:
mobile: 0488 839 917
mobile : 0488 844 503
CXD320 INDUSTRIAL & MINING CONVEYOR LUMINAIRE CXD320 Industralight Conveyor Luminaire is designed for mining and industrial lighting applications. Ideal for conveyors and gantry illumination. It features a robust, waterproof construction with high-intensity LED illumination, ensuring optimal visibility and durability in harsh environments. Offering energy savings and low maintenance requirements. Best in class illumination efficiency with wide distribution and optics. Quality Industrial LED luminaire. ELECTRICAL PARAMETERS Input Voltage: 90-277VAC Power Consumption: 36W / 42W / 62W / 70W LED Driver Classification: Integral Constant Current Light Source Classification: CREE XBD MECHANICAL SPECIFICATIONS Minimum IK Rating: IK09 IP Protection Rating: IP66 Nominal Dimensions: 290x336x211mm Construction Material: Unibody Alloy Construction Standard Colour/Finish: Powdercoated White Typical Net Weight: 5.5KG Recommended Ambient Temp: -15˚C - 50˚C CONFIGURATION OPTIONS ● Can be configured for horizontal or vertical pole mounting ● Multiple beam angles for optimum illumination uniformity ● Optional 2HR Emergency Configuration by request PHOTOMETRIC INFORMATION Typical Lumen Efficacy: >150lm/W CCT Colour Temperature: 3000K / 4000K / 6000K Colour Rendering (Ra): >80Ra TYPICAL APPLICATIONS Designed for uniform conveyor illumination in mining sites, hazardous areas, industrial facilities and factories. Ideal for achieving >40 Lux exceeding the requirements of AS/NZS 1680.2.4 DIMMING OPTIONAL
COMPLIANCE & CERTIFICATION ● IESNA2002 ● AS/NZS 1680.2.4 Min 40 LUX* ● AS/NZS60598, LM79, LM80 ●
Lifespan: Exceeds 50,000hrs @ L70
ORDERING INFORMATION Model Number:
CXD320
3000K / 4000K / 6500K 36W / 42W / 62W / 70W 90-265VAC / 24VDC
Specify LED CCT: Specify Wattage:
Input Voltage Option: Dimming Options: Optional Emergency
Non Dimmable / DALI / 1-10V / Wireless 2HR Emergency / 3HR Emergency
*Compliance to AS/NZS 1680.2.4 is subject to correct configuration, mounting height and spacings incorporated into the installation. All product details are subject to change without notice. Final specifications may vary.
toll-free: 1300 295 367 email:
mail@industralight.com.au sales reps:
mobile: 0488 839 917
mobile : 0488 844 503
30 degree wedge body designed to optimise the illumination unformity
Horizontal Mounting 290x336x211mm
Vertical Mounting 290x395x152mm
toll-free: 1300 295 367 email:
mail@industralight.com.au sales reps:
mobile: 0488 839 917
mobile : 0488 844 503
CXD320 INDUSTRIAL & MINING CONVEYOR LUMINAIRE Industralight CXD320 is a high-quality LED luminaire designed for mining conveyors. Featuring an accessible gear tray for easy servicing and future maintenance, this robust and efficient lighting solution ensures optimal performance in industrial environments, enhancing visibility with its superior LED technology.
CXD320 TUNNEL & CANOPY INSTALLATION CXD TunneL Ceiling Canopy Mount is an exceptional lighting solution tailored for surface-mounted and ceiling industrial applications. This versatile luminaire offers easy installation and robust performance, making it ideal for enhancing visibility in industrial environments. Its sleek design integrates seamlessly with various architectural styles, providing efficient, high-quality lighting for a wide range of settings.
toll-free: 1300 295 367 email:
mail@industralight.com.au sales reps:
mobile: 0488 839 917
mobile : 0488 844 503
Application Example
Type I asymmetrical optical lens, designed to achieve good illumination uniformity exceeding 50 lux with luminaire spacing of 14mtrs
The tilt angle can be adjusted on-site for both vertical (0 to +15°) and horizontal (0 to -15°) configurations.
Configuration allows horizontal or vertical spigot pole entry. Multiple mounting options.
Horizontal Mounting
Vertical Mounting
toll-free: 1300 295 367 email:
mail@industralight.com.au sales reps:
mobile: 0488 839 917
mobile : 0488 844 503
SFR850 SOLAR POWERED STREETLIGHT LUMINAIRE SFR800 is a new generation solar powered luminaire with very high lumen performance, ultra-efficient design and a range of high performance features and optional accessories. Dual solar panel configuration increases charge efficiency by up to 30%. All in one design with low profile, ideal for full off-grid locations. ELECTRICAL PARAMETERS Input Voltage: Stand Alone / Solar Generated LED Power: 50W 9600lm Battery Classification LiFePO4 battery 106Ah Light Source Classification: SEOUL SSC 5050 LED MECHANICAL SPECIFICATIONS Minimum IK Rating: IK10 IP Protection Rating: IP65 Nominal Dimensions: 1500x220x450mm Construction Material: Die-Cast Aluminum Mounting Options: Pole Mounted / Wall Mounted Rec. Working Temperature -10°C to 60°C Rec. Charging Temperature 0°C to 45°C CONFIGURATION OPTIONS ● Can be supplied with smart motion sensor ● PE Cell for dusk/dawn automation is optional ● Ancillary Equipment can be fitted inc security cameras, USB ● Several automation sensor options for total automation SOLAR AND OPTICAL CHARACTERISTICS DIMMING OPTIONAL
Solar Panel:
18V/70W (Double Crystal PV) 3000K / 4000K / 5700K / 6500K LiFeP04 Battery / 12.8V 36AH
CCT Colour Temperature: Battery Configuration:
Battery Lifespan (Cycles) >2000 Charge Cycle Typical Recharge Time Cycle 6.58 hours (sunlight dependant) Operating Time: 9hrs @ Full Capacity Typical LED Lumen Efficacy: 192lm/W Charging Device: On Board MPPT Intelli-Control Light Distribution Optics: 60°x156°/ 75°x160° / 78°x153° ULOR: = 0%, Luminaire Orientation 0°
COMPLIANCE & CERTIFICATION ● IESNA2002 ● EN60529, LM79, LM80 ●
Lifespan: L90B10 - 52 000 h, @Tq 25°C
ORDERING INFORMATION Model Number: SFR850 Mounting Configuration: Pole Mounted / Wall Mounted LED Power: 15W / 25W / 35W / 50W / 60W Specify Finish/Colour: Black / SIlver / White Control Options: PIR Sensor / PE Automation Beam Angle (Optics) 60°x156°/ 75°x160° / 78°x153°
All product details are subject to change without notice. Final specifications may vary.
toll-free: 1300 295 367 email:
mail@industralight.com.au sales reps:
mobile: 0488 839 917
mobile : 0488 844 503
toll-free: 1300 295 367 email:
mail@industralight.com.au sales reps:
mobile: 0488 839 917
mobile : 0488 844 503
MAKO® SERIES - SPORTS LIGHTING
Industralight Mako® Series is excellent for tennis courts, soccer and football pitches, softball, outdoor courts, lawn bowls, golf putting greens, and many other sports field applications.
● ● ● ● ● ● ● ● ●
Various LED Power Options up to 420W Replace up to 1000W Metal Halide >50% Energy reduction vs H.I.D Metal Halide
Architectural Pole Systems Available Suitable for Square or Round Poles
Solid State Lighting - Instant Start 100% Dimming, Sensor and Wireless Control Options
Smooth Uniformity for high standards
Complies with Australian standards & conditions
OPTIONAL GLARE SHIELD MKGS2
toll-free: 1300 295 367 email:
mail@industralight.com.au sales reps:
mobile: 0488 839 917
mobile : 0488 844 503
SFR450-40W SOLAR POWERED POLE MOUNT LUMINAIRE SFR450 is a new generation solar powered luminaire with very high lumen performance, ultra-efficient design and a range of high performance features and optional accessories. Optimum thermal design and modular compartment allow for various configurations. All in one design with low profile, ideal for full off-grid locations.
MAIN FEATURES
● ● ●
Fully Adjustable Design for Optimum Solar Positioning Auto Control Mode to Maximise Operating Duration
12VDC Auxiliary Output Power
ELECTRICAL PARAMETERS Input Voltage:
Stand Alone / Solar Generated
LED Power:
40W 6800lm
System Voltage:
12VDC
Battery Classification
LiFePO4 Battery 12.8V 24AH
Light Source Classification:
Lumileds Luxeon
MECHANICAL SPECIFICATIONS Minimum IK Rating: IK09 IP Protection Rating: IP66 Nominal Dimensions:
SENSOR OPTIONAL
Refer to Drawing Die-Cast Aluminum
Construction Material:
Mounting Options:
Pole Mounted / Wall Mounted
Rec. Working Temperature Rec. Charging Temperature
-10°C to 50°C 0°C to 45°C
CONFIGURATION OPTIONS ●
Can be supplied with smart motion sensor PE Cell for dusk/dawn automation is optional
● ● ●
Optional Wireless Network Control & Monitoring Several automation sensor options for total automation
SOLAR AND OPTICAL CHARACTERISTICS
Solar Panel:
Monocrystalline 18V 50W
CCT Colour Temperature: Battery Configuration: Battery Lifespan (Cycles) Typical Recharge Time Cycle Typical Operating Duration: Typical LED Lumen Efficacy:
3000K / 4000K / 5700K / 6500K LiFeP04 Battery / 12.8V 24AH
>2000 Charge Cycle
6 hours (sunlight dependant) 2-3 Days (Auto Control Mode)
170lm/W
Charging Device:
On Board MPPT Intelli-Control Type II-S / Type II-M / Type III-M = 0%, Luminaire Orientation 0°
Light Distribution Optics:
ULOR:
ORDERING INFORMATION Model Number:
SFR450
Pole Mounted / Wall Mounted LED 40W / Battery Capacity: 24Ah
Mounting Configuration:
Power:
Black / Silver / White
Specify Finish/Colour: Specify Control Options:
Sensor Auto Control / PE Cell Specify Light Distribution Type II-S / Type II-M / Type III-M All product details are subject to change without notice. Final specifications may vary.
toll-free: 1300 295 367 email:
mail@industralight.com.au sales reps:
mobile: 0488 839 917
mobile : 0488 844 503
20W/ 30W
40W
50W
Optional 60W / 80W
60W
80W
toll-free: 1300 295 367 email:
mail@industralight.com.au sales reps:
mobile: 0488 839 917
mobile : 0488 844 503
SFR770 SOLAR POWERED STREETLIGHT LUMINAIRE SFR770 is a stand alone solar powered luminaire suitable for a range of industrial and commercial projects. Constructed from high quality alloy materials and is fitted with the latest generation solar power generation and battery system. Ideal for carpark lighting, security lighting and street lighting. ELECTRICAL PARAMETERS Input Voltage: Stand Alone / Solar Generated Power Consumption: 40W / 60W / 80W Battery Classification LiFePO4 battery 106Ah Light Source Classification: Bridgelux SMD3030
MECHANICAL SPECIFICATIONS Minimum IK Rating: IK10 IP Protection Rating: IP66 Nominal Dimensions:
DIMMING OPTIONAL
1587x215x60mm Die-Cast Aluminum
Construction Material: Suitable Pole Diameter
60-65mm Recommended Ambient Temp: -30˚C - 60˚C CONFIGURATION OPTIONS ●
SFR770 can be supplied with smart motion sensor PE Cell for dusk/dawn automation is optional
● ● ●
Luminaire colour can be refinished
Custom LED configurations from 10W-120W available
SOLAR AND OPTICAL CHARACTERISTICS Typical Lumen Efficacy: 140lm/W CCT Colour Temperature:
3000K / 4000K / 5700K / 6500K
Solar Panel Configuration: High Efficiency Monocrystalline Typical Recharge Time Cycle 6-7 hours (sunlight dependant) CONTROL OPTIONS
Dimming and control options are available by special request. Control protocols include DALI, Casambi, Wireless, 1-10V, analogue dimming. Built in sensor options with automation settings can be included.
COMPLIANCE & CERTIFICATION ● IESNA2002 ● AS/NZS60598, LM79, LM80 ●
Lifespan: Exceeds 50,000hrs @ L70
ORDERING INFORMATION Model Number:
SFR770 Mounting Configuration: Wall / 60-65mm Pole (Spigot) Mounting Mounting Accessories: Wall Mount Bracket Specify Finish/Colour: Black / White / Metallic Silver / Custom Control Options: PE Cell / Timer / Smart Motion Sensor Warranty: Non-Dimmable / DALI / Phase Dim
All product details are subject to change without notice. Final specifications may vary.
toll-free: 1300 295 367 email:
mail@industralight.com.au sales reps:
mobile: 0488 839 917
mobile : 0488 844 503
TLR LED TRAFFIC SIGNAL LIGHT SYSTEM LED traffic light fittings are a professional solution for councils, government bodies, mining sites and other industrial locations that require traffic control LED light sources. Industralight TLR series is a conventional RED/YELLOW/GREEN traffic light and is available with either 200mm or 300mm module sizes. ELECTRICAL PARAMETERS Input Voltage: 100-265VAC or 24VDC Power Consumption: Max 18W LED Driver Classification: Integral Light Source Classification: Industralight SMD Signal LED
MECHANICAL SPECIFICATIONS Minimum IK Rating: IK10 IP Protection Rating: IP65 Environmental Protection:
UV Stable Housing
Construction Material: Nominal Module Diameter:
Toughened Polycarbonate
200mm / 300mm
Recommended Ambient Temp: -20˚C - 55˚C CONFIGURATION OPTIONS ●
Adjustable mounting bracket arms included
● ● ●
Custom configurations can be manufactured by request Housing colour can be customised by special request
Mains voltage or 24VDC versions available
PHOTOMETRIC INFORMATION Typical Lumen Efficacy:
70lm/W
CCT Colour Temperature: Colour Rendering (Ra): Beam Angle/Viewing Angle:
RED/YELLOW/GREEN
NA
120˚
CONTROL OPTIONS Industralight can provide traffic and signal lighting systems for all applications. Modular signal heads in different combinations are available. TLR series products can be operated using stand-alone switching, timers, sensor automation or centralised control system.
COMPLIANCE & CERTIFICATION ● IESNA2002 ● AS/NZS60598, LM79, LM80 ●
Lifespan: Exceeds 50,000hrs @ L70
ORDERING INFORMATION Model Number:
TLR Series
RED/YELLOW/GREEN 200mm / 300mm
LED Colour Configuration: LED Module Diameter:
Specify Housing Colour: Black Input Voltage Option:
110-265VAC or 24VDC
Control Option:
Sensor / Automation / Stand-Alone
All product details are subject to change without notice. Final specifications may vary.
toll-free: 1300 295 367 email:
mail@industralight.com.au sales reps:
mobile: 0488 839 917
mobile : 0488 844 503
H100 Horticulture Grow Lighting Luminaire H100 is a high performance, full-spectrum lighting solution for commercial cannabis cultivation, with the power to scale from vegetation growth to higher light intensities in bloom. H100 is interconnectable in a daisy-chain configurations of up to 5 units
ELECTRICAL PARAMETERS Input Voltage:
100-277VAC
Power Consumption:
600W
PPF Output
1200 umol/s
Light Source Classification:
Bridgelux SMD
MECHANICAL SPECIFICATIONS Minimum IK Rating: IK10 IP Protection Rating: IP66 Nominal Dimensions:
1033x1202x139mm
Construction Material:
Aluminum
Net Weight: 11.5kg Recommended Ambient Temp: -5˚C - 40˚C CONFIGURATION OPTIONS ● 1-10V Dimmable Option Available ● Optional Wire Suspension Kit ● Luminaire colour can be refinished ● OPTICAL AND EFFICIENCY CHARACTERISTICS System Efficacy: 2.0umol/J (+/-5%) PPF Output 1200umol/S LED Output
DIMMING OPTIONAL
Custom LED configurations from 10W-720W available
Full Spectrum inc UV & IR
Heat Generated:
2046 BTU
CONFIGURATION OPTIONS This product can be customised or configured according to the needs of your project. Dimming and control options are available by special request. Control protocols include DALI, Casambi, Wireless, 1-10V, analogue dimming.
COMPLIANCE & CERTIFICATION ● IESNA2002 ● AS/NZS60598, LM79, LM80 ● ORDERING INFORMATION Model Number: H100 Inc Accessories:
Lifespan: Exceeds 50,000hrs @ L70
Power Connection Cable 1.5mtr Suspension Kit (Optional)
Mounting Accessories: Specify Finish/Colour:
Silver / Custom
1-10V Dimmable (Optional)
Control Options:
Non-Dimmable / DALI / Phase Dim
Warranty
All product details are subject to change without notice. Final specifications may vary.
toll-free: 1300 295 367 email:
mail@industralight.com.au sales reps:
mobile: 0488 839 917
mobile : 0488 844 503
Concealed LED Lighting, NSW State Library, Sydney, Australia Industralight worked closely with the team at the library to refine specific LED optic and fixture configurations to achieve optimum combination of aesthetic and performance.
Linear Lighting, Bungan Lake Carpark, Mona Vale Industrial luminaires installed into car park and exterior building facade for security illumination and general purpose illumination. Stable LED configurations for demanding environments. 0% failure rate >5 years operation.
EXD939 EXPLOSION PROOF LUMINAIRE EXD939 is a Exd luminaire is a very high output product for demanding hazardous locations and explosion proof zones. AVailable up to 480W,, suitable for highly corrosive areas, mining sites, offshore oil platforms, oil drilling platform, steel factories, chlorine plants, alkaline and acidic areas, vulcanization cyanide, etc. ELECTRICAL PARAMETERS Input Voltage: 90-264VAC Rated Frequency: 50Hz / 60Hz Power Consumption: 240W / 300W /400W / 480W LED Driver Classification: Integral, Constant Current Light Source Classification: CREE High Power LED Zone Classification: Zone 2 / Zone 22 Gas Explosive Group: Group IIA, IIB, IIC MECHANICAL SPECIFICATIONS Minimum IK Rating: IK10 IP Protection Rating: IP66 Body Dimensions: 602x270x340mm Construction Material: Powdercoated Aluminium Standard Colour/Finish: Grey / Signal Yellow Ambient Temp: -40˚C to 55˚C Net Weight: 13.5Kg Lead-In Cable Diameter 8mm-12mm OD CONFIGURATION OPTIONS ● Dimming Options by request including 1-10V / DALI ● Signal Yellow / Orange by request ● Optional Beam Angles: 18˚/ 25˚ PHOTOMETRIC INFORMATION Typical Lumen Efficacy: 95lm/W CCT Colour Temperature: 3000K / 4000K / 5000K Colour Rendering (Ra): >70Ra / 80Ra Beam Angle/Viewing Angle: 18° or 25° COMPLIANCE & CERTIFICATION ● IESNA2002, AS/NZS60598, LM79, LM84, LM80 ● Lifespan: Exceeds 50,000hrs @ L70 ● Ex Class: Ex db e IIC T3 Gb Ex tb IIIC T195°C Db ● ATEX CertIfication EPT17 ATEX 2632X ● Zone 2/ Zone 22 Classification
ORDERING INFORMATION Model Number:
EXD939
100W / 120W / 150W / 200W / 240W
Specify Wattage:
18˚/ 25˚
Beam Angle:
3000K / 4000K / 5000K
CCT:
90-305VAC
Input Voltage Option:
Grey / Signal Yellow
Specify Colour:
All product details are subject to change without notice. Final specifications may vary.
toll-free: 1300 295 367 email:
mail@industralight.com.au sales reps:
mobile: 0488 839 917
mobile : 0488 844 503
Linear Lighting, Dutton Garage Industralight design suite completed high fidelity lighting simulation for new office and showroom project for Dutton Garage. Simulation includes reflective surfaces , LUX report and accurate model for specification purposes.
ML80 ARC® TUBULAR POLYCARBONATE LED LUMINAIRE Arc-ML80 is a IP65 hazardous area LED tubular fitting with enclosed LED light source and integral LED driver. The fittings are constructed from chemical resistant polycarbonate and have a clear lens diffuser. They are ideally suited to general purpose lighting in harsh environments and hazardous areas. ELECTRICAL PARAMETERS Input Voltage: 110-265VDC Power Consumption: 16W / 29W LED Driver Classification: Integral, Constant Current Light Source Classification: Industralight SMD2835 LED
MECHANICAL SPECIFICATIONS Minimum IK Rating: IK10 IP Protection Rating: IP65 Nominal Dimensions:
747mm or 1052mm
Construction Material: Fixing Accessories:
Flame-Proof Polycarbonate
Stainless Steel Clip
Recommended Ambient Temp: -20˚C - 50˚C KEY FEATURES ●
Stainless steel mounting brackets included Available in different length variants
●
DIMMING OPTIONAL
PHOTOMETRIC INFORMATION Typical Lumen Efficacy:
70lm/W
CCT Colour Temperature: Colour Rendering (Ra): Beam Angle/Viewing Angle:
3000K /4000K / 6500K
>80Ra
120˚
CONTROL OPTIONS ML80 can be supplied with pre terminated cable looms for plug & play interconnection. Dimming and control options are available by special request. Control protocols include DALI, Casambi, Wireless, 1-10V, analogue dimming.
COMPLIANCE & CERTIFICATION ● IESNA2002 ● AS/NZS60598, LM79, LM80 ● ORDERING INFORMATION Model Number: ML80 Specify LED CCT:
Lifespan: Exceeds 50,000hrs @ L70
3000K / 4000K / 6500K 10W / 21W / 16W / 29W 747mm or 1052mm
Specify Wattage: Specify Length: Fixing Brackets:
Included (Stainless Steel Clips)
Interconnect Cable and Wiring Optional Non Dimmable / DALI / 1-10V / Phase Dim
Cable Option:
Dimming Option: IK Protection Rating:
IK10 Version
All product details are subject to change without notice. Final specifications may vary.
toll-free: 1300 295 367 email:
mail@industralight.com.au sales reps:
mobile: 0488 839 917
mobile : 0488 844 503
Linear Lighting, Dutton Garage Industralight design suite completed high fidelity lighting simulation for new office and showroom project for Dutton Garage. Simulation includes reflective surfaces , LUX report and accurate model for specification purposes.
EXD930F60 MODULAR EXD FLOODLIGHT EXD930 is a general purpose industrial luminaire for use in hazardous locations. The modular design and adjustable bracket makes it suitable for a wide range of uses. Oil refineries, exploration sites, chemical industries, power plants and more. Offers high protection against corrosion and harsh chemicals.
ELECTRICAL PARAMETERS Input Voltage:
120-277VAC 50Hz / 60Hz
Rated Frequency: Power Consumption:
30W / 60W / 80W
LED Driver Classification: Light Source Classification:
Integral, Constant Current
CREE High Power LED
Zone Classification: Gas Explosive Group:
Zone 1 / Zone 2 / Zone 21 / Zone 22
Group IIA, IIB, IIC
MECHANICAL SPECIFICATIONS Minimum IK Rating: IK10 IP Protection Rating: IP66 Body Dimensions:
212(L)x338(W)x93mm(H) Powdercoated Aluminium
Construction Material: Standard Colour/Finish:
Grey / Signal Yellow
Recommended Ambient Temp: -40˚C to 55˚C Net Weight: 5.0Kg Lead-In Cable Diameter (OD):
M20×1.5(G1/2, / , NPT1/2, M25×1.5)
CONFIGURATION OPTIONS ●
Can be fitted with 316 Stainless Steel Bracket by Request
●
Compliant with Temperature group T1- T6
● Exd Rated Junction Box and Accessories available by request PHOTOMETRIC INFORMATION Typical Lumen Efficacy: 125lm/W CCT Colour Temperature: 3000K / 4000K / 5000K Colour Rendering (Ra): >70Ra / 80Ra Beam Angle/Viewing Angle: 80° x 100° COMPLIANCE & CERTIFICATION ● IESNA2002, AS/NZS60598, LM79, LM80 ● Lifespan: Exceeds 90,000hrs @ L70 ● Ex Clas: Ex tb IIIC T95°C Db Ex db e IIC T5 Gb ● ATEX CertIfication: SEV 21 ATEX0500X ● IECex Certification: IECEX SEV 21.0002X ORDERING INFORMATION Model Number: EXD930F60 Mounting Option: Pole Mounted / Bracket Mounted Specify Wattage: 30W / 60W / 80W CCT: 3000K / 4000K / 5000K Input Voltage Option: 90-265VAC or 24VDC Specify Colour: Grey / Signal Yellow
All product details are subject to change without notice. Final specifications may vary.
toll-free: 1300 295 367 email:
mail@industralight.com.au sales reps:
mobile: 0488 839 917
mobile : 0488 844 503
Linear Lighting, Titan Cranes Titan Cranes approached Industralight to provide high powered illumination for their fleet of cranes. RGBW Rebel floodlights with DMX512 control are used for RED colour washing and effects.
RF6600-RGBW REBEL® LED FLOODLIGHT 600W Rebel® series is a family of high quality LED floodlight luminaires which can be used for a variety of commercial and industrial lighting applications. Rebel LED floodlights are supplied integral LED driver and multi-purpose adjustable trunnion bracket. Typical applications include billboards & signage, area floodlighting, pole lighting, container and shipyards, industrial sites, warehousing, streetlighting, security lighting and more. ELECTRICAL PARAMETERS Input Voltage: 90-305VAC Power Consumption: 600W RGB/RGBW LED Driver Classification: Meanwell ELG Series Light Source Classification: Luxeon® ES LED MECHANICAL SPECIFICATIONS Minimum IK Rating: IK10 IP Protection Rating: IP65 Nominal Dimensions: 811 x 606 x 369mm Construction Material: Toughened Alloy Construction Adjustable Bracket: 180˚ Adjustable Trunnion Bracket Recommended Ambient Temp: -40˚C - 50˚C CONFIGURATION OPTIONS ● Adjustable mounting bracket included ● 24VDC version available by special request ● Non-standard colours available by special request PHOTOMETRIC INFORMATION Typical Lumen Efficacy: 75-110lm/W CCT Colour Temperature: RGB / RGBW+3000K/4000K Colour Rendering (Ra): >70Ra Beam Angle/Viewing Angle: 15˚ / 30˚ / 85˚ / 135˚x85˚ CONTROL OPTIONS Rebel Floodlight luminaires can accommodate integrated control interfaces suitable for many control options. Typical control options: include DMX512, DALI-2, DT8, Casambi Wireless. Wireless-DMX and other protocols available by request. Optional DALI-2 (DT8). DIMMING OPTIONAL
COMPLIANCE & CERTIFICATION ● IESNA2002 ● AS/NZS60598, LM79, LM80 ●
Lifespan: Exceeds 50,000hrs @ L70
ORDERING INFORMATION Model Number:
RF6600
RGB / RGBW+3000K / RGBW+4000k
Specify LED CCT: Specify Beam Angle:
15˚ / 30˚ / 85˚ / 135˚x85˚ Specify Finish/Colour: Black / White / Custom Input Voltage Option: 90-305VAC or 24VDC Input Control Option:
DALI DT8/ Casambi Wireless / DMX512
All product details are subject to change without notice. Final specifications may vary.
toll-free: 1300 295 367 email:
mail@industralight.com.au sales reps:
mobile: 0488 839 917
mobile : 0488 844 503
Linear Lighting, Titan Cranes Titan Cranes approached Industralight to provide high powered illumination for their fleet of cranes. RGBW Rebel floodlights with DMX512 control are used for RED colour washing and effects.
Linear Lighting, UTS Fashion Show Tubular LED illuminated profiles made to order by Industralight for University of Technology, Sydney. The profiles were installed onto catwalk stage for a fashion event and designed to meet brief provided by the designer. All profiles made in Australia.
Linear Lighting, Victorian Specialist Centre Industralight designed and manufactured bespoke lighting throughout the Victorian Specialist Centre project in Melbourne. Industralight services included lighting design support with simulated LUX calculations, luminaire design and manufacturing.
SMD1000 RIGID LED STRIP MODULE SMD1000 is a high quality linear LED strip module for linear lighting systems. The light source delivers superior lumen performance and the rigid copper PCB provides enhanced thermal management. SMD1000 is an ideal professional light source for use in linear profile lighting and components. ELECTRICAL PARAMETERS Input Voltage: 24VDC Power Consumption: 28.8W Power Configuration: Constant Voltage Light Source Classification: Samsung SMD561 LED Drive Current: 60mA MECHANICAL SPECIFICATIONS IP Protection Rating: IP20 Dimensions – PCB Width: 22mm Dimensions – PCB Thickness: 1.6mm Standard Length: 1000mm PCB Material: Copper + Aluminum PCB Connector: 2-Pin DG2002 Recommended Ambient Temp: -20˚C - 45˚C CONFIGURATION OPTIONS ● Industralight HLP mounting profiles available by request ● Custom LED strip module lengths available by request ● Dimmable LED driver options available by request PHOTOMETRIC INFORMATION Typical Lumen Efficacy: 100lm/W CCT Colour Temperature: 2700K / 3000K / 4000k/ 6000K Colour Rendering (Ra): >90Ra Beam Angle/Viewing Angle: 120˚ CONTROL OPTIONS This product can be customised or configured according to the needs of your project. Dimming and control options are available by special request. Control protocols include DALI, Casambi, Wireless, 1-10V, analogue dimming. COMPLIANCE & CERTIFICATION ● IESNA2002 ● AS/NZS60598, LM79, LM80 ● Lifespan: Exceeds 50,000hrs @ L70 ORDERING INFORMATION Model Number: SMD1000 Specify LED CCT: 2700K / 3000K / 4000K / 6000K Specify Module Length: 500mm / 1000mm Specify Wattage: 14.4W / 28.28W Power Mode: Constant Voltage Control Option: PWM / DALI / Phase Dim
PWM DIMMABLE
All product details are subject to change without notice. Final specifications may vary.
toll-free: 1300 295 367 email:
mail@industralight.com.au sales reps:
mobile: 0488 839 917
mobile : 0488 844 503
Linear Lighting, UTS Fashion Show Tubular LED illuminated profiles made to order by Industralight for University of Technology, Sydney. The profiles were installed onto catwalk stage for a fashion event and designed to meet brief provided by the designer. All profiles made in Australia.
XR110 IP65 TUBULAR LED FITTING XR110 is a robust and weatherproof linear LED light luminaire suitable for a wide range of industrial and commercial lighting applications. XR110 luminaires can be installed quickly and easily for permanent or temporary lighting projects. ELECTRICAL PARAMETERS Input Voltage: 110-240VDC Power Consumption: 10W / 14W / 18W / 22W LED Driver Classification: Integral, Constant Current Light Source Classification: Industralight SMD2835 LED
MECHANICAL SPECIFICATIONS Minimum IK Rating: IKx IP Protection Rating: IP65 Nominal Lengths:
DIMMING OPTIONAL
600/900/1200/1500mm Mounting Clips Included Aluminium & Polycarbonate 145g / 220g / 290g / 370g
Fixing Method:
Construction Material:
Net Weight:
Recommended Ambient Temp: -35˚C - 55˚C CONFIGURATION OPTIONS ● Stainless steel mounting clips included ●
Optional 24VDC version available by special request Dimmable versions available by special request
●
PHOTOMETRIC INFORMATION Typical Lumen Efficacy:
90lm/W
CCT Colour Temperature: Colour Rendering (Ra): Beam Angle/Viewing Angle:
3000K/4000K/6500K
>75Ra
270˚
CONTROL OPTIONS This product can be customised or configured according to the needs of your project. Dimming and control options are available by special request. Control protocols include DALI, Casambi, Wireless, 1-10V, analogue dimming. COMPLIANCE & CERTIFICATION ● IESNA2002 ● AS/NZS60598, LM79, LM80 ● Lifespan: Exceeds 50,000hrs @ L70 ORDERING INFORMATION Model Number: XR110T Specify LED CCT: 3000K/4000K/6500K Cable Configuration: Single Ended / Double Ended Linkable Specify Length: 600/900/1200/1500mm Input Voltage Option: 100-240VAC or 24VDC Optional Accessory: Stainless Steel Mounting Clips Control Option: Non-Dimmable / 1-10V / Phase Dim
All product details are subject to change without notice. Final specifications may vary.
toll-free: 1300 295 367 email:
mail@industralight.com.au sales reps:
mobile: 0488 839 917
mobile : 0488 844 503
Linear Lighting, UTS Fashion Show Tubular LED illuminated profiles made to order by Industralight for University of Technology, Sydney. The profiles were installed onto catwalk stage for a fashion event and designed to meet brief provided by the designer. All profiles made in Australia.
EXD926 LINEAR EXPLOSION PROOF LUMINAIRE EXD926 is a fixed hazardous-location luminaire with high quality components and construction. Available in different mounting configurations and with wire guard protection. Suitable for petrochemical plants, oil platforms, oil pump housings, transport hubs, petrol stations and other flammable and explosive locations. ELECTRICAL PARAMETERS Input Voltage: 90-264VAC Power Consumption: 20W / 40W LED Driver Classification: Integral, Constant Current Light Source Classification: Citizen SMD LED Zone Classification: Zone 1 / Zone 2 / Zone 21 / Zone 22 Gas Explosive Group: Group IIA, IIB, IIC. MECHANICAL SPECIFICATIONS Minimum IK Rating: IK10 IP Protection Rating: IP66 Length Options: 1390mm / 780mm Construction Material: Powdercoated Aluminium Standard Colour/Finish: Grey / Signal Yellow Recommended Ambient Temp: -40˚C to 55˚C CONFIGURATION OPTIONS ● Various Mounting Options Available ● Emergency Battery Backup Version by Request PHOTOMETRIC INFORMATION Typical Lumen Efficacy: 100lm/W CCT Colour Temperature: 5000K Colour Rendering (Ra): >80Ra Beam Angle/Viewing Angle: 125˚ / 90x110° CUSTOM OPTIONS Hazardous area lighting systems can be configured according to the needs of your project. Control options are available by special request. Control protocols include DALI, Casambi Wireless, Automation & Sensor Detection.
COMPLIANCE & CERTIFICATION ●
IESNA2002, AS/NZS60598, LM79, LM80 Lifespan: Exceeds 50,000hrs @ L70 ATEX CertIfication INERIS 15ATEX0052X IECex Certification: IECEx EUT 16.0014X Ex Clas: Ex de op is IIC T5 Gb / Ex op is tb IIIC T95 ℃ Db,
● ● ● ●
ORDERING INFORMATION Model Number:
EXD926
1390mm / 780mm
Length Variant: Specify Wattage: Emergency Version: Input Voltage Option:
20W / 40W
90mins / 120mins Emergency Option
90-265VAC or 24VDC Grey / Signal Yellow
Specify Colour:
All product details are subject to change without notice. Final specifications may vary.
toll-free: 1300 295 367 email:
mail@industralight.com.au sales reps:
mobile: 0488 839 917
mobile : 0488 844 503
EXD910C EXPLOSION PROOF CONVEYOR LUMINAIRE Industralight EXD910C is an Industrial grade explosion proof LED light luminaire designed for conveyor and workzone illumination projects. Popular for use on mining and industrial sites, the luminaire carries IECex and ATEX approvals suitable for hazardous locations ELECTRICAL PARAMETERS Input Voltage: 100-240VAC Power Consumption: 48W LED Driver Classification: Constant Current, Integral Light Source Classification: CREE High Power LED
MECHANICAL SPECIFICATIONS Minimum IK Rating: IK09 IP Protection Rating: IP66 Nominal Dimensions:
DIMMING OPTIONAL
382×184×204
Construction Material: Standard Colour/Finish:
Powdercoated Aluminium Signal Yellow / SIlver / Black
Recommended Ambient Temp: -40˚C to 55˚C CONFIGURATION OPTIONS ● Optional Mounting Bracket ● Available in a variety of power outputs
PHOTOMETRIC INFORMATION Typical Lumen Efficacy:
100lm/W
CCT Colour Temperature: Colour Rendering (Ra): Beam Angle/Viewing Angle:
4000K / 6500K
>85Ra
185˚
CONTROL OPTIONS This product can be customised or configured according to the needs of your project. Dimming and control options are available by special request. Control protocols include DALI, Casambi, Wireless, 1-10V, analogue dimming.
COMPLIANCE & CERTIFICATION ●
IECex Approved / ATEX Approved
● ●
AS/NZS60598, LM79, LM80
Lifespan: Exceeds 50,000hrs @ L70
ORDERING INFORMATION Model Number:
EXD910C
3000K / 4000K / 6500K
Specify LED CCT:
Specify Wattage Option: 48W Specify Finish/Colour: Signal Yellow / Grey / Custom Input Voltage Option: 110-240VAC or 24VDC Control Options:
Non DImmable / Auto Sensor / Casambi
All product details are subject to change without notice. Final specifications may vary.
toll-free: 1300 295 367 email:
mail@industralight.com.au sales reps:
mobile: 0488 839 917
mobile : 0488 844 503
AM2318 GECKO® LED WORKLIGHT/FLOODLIGHT Industralight Gecko fittings are multi-purpose LED spotlights that can be used for a wide range of applications. They are a compact design and work on wide voltage range of 9-27VDC ideal for industrial projects, automotive & security applications, task lighting, vehicles, marine applications, machinery, mining and industrial equipment etc. ELECTRICAL PARAMETERS Input Voltage: 9-27VDC Power Consumption: 18W LED Driver Classification: Constant Voltage Input Light Source Classification: CREE XR High Power LED
MECHANICAL SPECIFICATIONS Minimum IK Rating: IK08 IP Protection Rating: IP67 Nominal Dimensions:
123x132x54mm
Construction Material: Standard Colour/Finish:
Extruded Alloy + Stainless Steel
Black Recommended Ambient Temp: -25˚C - 55˚C CONFIGURATION OPTIONS ●
Adjustable stainless steel mounting brackets included Special LED colours available by special request
● ●
Available in different beam angles
PHOTOMETRIC INFORMATION Typical Lumen Efficacy:
85lm/W 6500K
CCT Colour Temperature: Colour Rendering (Ra): Beam Angle/Viewing Angle:
>85Ra
30˚ or 60˚
CONTROL OPTIONS Constant voltage controller options are compatible with this product. Dimming and control options are available by special request. Control protocols include DALI, Casambi, Wireless, 1-10V, analogue dimming. This product can be connected to sensor and automation devices
COMPLIANCE & CERTIFICATION ● IESNA2002 ● AS/NZS60598, LM79, LM80 ●
Lifespan: Exceeds 50,000hrs @ L70
ORDERING INFORMATION
AM2318
Model Number: Specify LED CCT: Specify Beam Angle:
6500K (other LED options available)
30˚ / 60˚
Specify Wattage Option: 18W Input Voltage Option:
12VDC / 24VDC / 27VDC
Non Dimmable / PWM / Casambi
Dim Control Option:
All product details are subject to change without notice. Final specifications may vary.
toll-free: 1300 295 367 email:
mail@industralight.com.au sales reps:
mobile: 0488 839 917
mobile : 0488 844 503
AM2372 GECKO® LED WORKLIGHT/FLOODLIGHT Industralight Gecko fittings are multi-purpose LED spotlights that can be used for a wide range of applications. They are a compact design and work on wide voltage range of 9-27VDC, ideal for industrial projects, automotive & security applications, task lighting, vehicles, marine applications, machinery, mining and industrial equipment etc. ELECTRICAL PARAMETERS Input Voltage: 9-27VDC Power Consumption: 72W LED Driver Classification: Constant Voltage Input Light Source Classification: CREE XR High Power LED
MECHANICAL SPECIFICATIONS Minimum IK Rating: IK08 IP Protection Rating: IP67 Nominal Dimensions:
350x88x67mm
Construction Material: Standard Colour/Finish:
Extruded Alloy + Stainless Steel
Black Recommended Ambient Temp: -25˚C - 55˚C CONFIGURATION OPTIONS ●
Adjustable stainless steel mounting brackets included Special LED colours available by special request
● ●
Available in different beam angles
PHOTOMETRIC INFORMATION Typical Lumen Efficacy:
85lm/W 6500K
CCT Colour Temperature: Colour Rendering (Ra): Beam Angle/Viewing Angle:
>85Ra
30˚ or 40˚
CONTROL OPTIONS Constant voltage controller options are compatible with this product. Dimming and control options are available by special request. Control protocols include DALI, Casambi, Wireless, 1-10V, analogue dimming. This product can be connected to sensor and automation devices
COMPLIANCE & CERTIFICATION ● IESNA2002 ● AS/NZS60598, LM79, LM80 ●
Lifespan: Exceeds 50,000hrs @ L70
ORDERING INFORMATION
AM2372
Model Number: Specify LED CCT: Specify Beam Angle:
6500K (other LED options available)
30˚ / 40˚/ 60˚
Specify Wattage Option: 10W Input Voltage Option:
12VDC / 24VDC / 27VDC
Non Dimmable / PWM / Casambi
Dim Control Option:
All product details are subject to change without notice. Final specifications may vary.
toll-free: 1300 295 367 email:
mail@industralight.com.au sales reps:
mobile: 0488 839 917
mobile : 0488 844 503
Interior RGB Lighting, Macquarie University, Sydney, Australia Industralight supplied custom made luminaires throughout the university project. Powdercoated linear lighting, track mounted spotlighting, handrail lighting and general area lighting
DK600 LED DOCKLIGHT SWING ARM LUMINAIRE DK600 is an industrial-grade task lighting solution manufactured from robust materials. The multi-pivot arm is available in two size configurations and can be powdercoated in any colour finish by special request. Typical applications include loading docks, factories, delivery zones, manufacturing & professing, inspection facilities. ELECTRICAL PARAMETERS Input Voltage: 100-277VAC Power Consumption: 12W / 23W / 60W LED Driver Classification: Integral Constant Current Light Source Classification: Philips COB LED
MECHANICAL SPECIFICATIONS Minimum IK Rating: IK10 IP Protection Rating: IP65 Swing Arm Length:
1000mm / 2400mm Powdercoated Steel
Construction Material: Standard Colour/Finish:
Signal Yellow Recommended Ambient Temp: -30˚C - 55˚C KEY FEATURES ● Adjustable Swing Arm + Pivot Luminaire ● Industrial Grade Construction
PHOTOMETRIC INFORMATION Typical Lumen Efficacy:
95lm/W
CCT Colour Temperature: Colour Rendering (Ra): Beam Angle/Viewing Angle:
4000K / 6500K
>95Ra
85˚
CONFIGURATION OPTIONS DK600 can be customised or configured according to the needs of your project. Swing Arm length can be tailored to suit specific work bays. Is available in single arm or twin arm variants. Signal yellow or Signal Orange powdercoated finish.
COMPLIANCE & CERTIFICATION ● IESNA2002 ● AS/NZS60598, LM79, LM80 ● ORDERING INFORMATION Model Number: DK600 Specify LED CCT:
Lifespan: Exceeds 50,000hrs @ L70
4000K / 6500K
Swing Arm Length: 1000mm / 2400mm Specify Finish/Colour: Signal Yellow / SIgnal Orange Specify Wattage: 12W / 23W / 60W Arm Configuration Single Arm or Twin Arm
All product details are subject to change without notice. Final specifications may vary.
toll-free: 1300 295 367 email:
mail@industralight.com.au sales reps:
mobile: 0488 839 917
mobile : 0488 844 503
DMX600 DIGITAL DMX PHASE DIMMER CONTROLLER DMX600 is a powerful 240V dimming controller designed for specific commercial applications. The device has four 240V channel outputs which can control phase dimmable 240V products, as well as 4 separate 1-10V output channels. DMX600 can accepts DMX512 signal input and is ideal for industrial use, poultry farm facilities and other commercial projects. KEY SPECIFICATIONS Input Voltage: 90-240VAC Input Protocol: DMX512(1990) Output Protocol: Phase-Cut Dimmable Auxiliary Output Protocol: 1-10V Analogue Output Channels: 4 x Addressable Outputs Maximum Output Load: 12A Mounting Method: DIN Rail Mounted IP Protection Rating: IP20 Nominal Dimensions: 190(W)x88(H)x57(D)mm Connection Method: Screw Terminals Net Weight: 0.59Kg Recommended Ambient Temp: -10˚C - 40˚C
DIMMABLE
CONFIGURATION OPTIONS ●
Pre-configured DMX input control available by request Compatible with Industralight lighting control software
●
TYPICAL APPLICATIONS
Industrial Projects, Poultry Farm Facilities Commercial Projects, Lighting Automation, Building Automation.
SYSTEM OVERVIEW DMX600 provides an interface between DMX512 control systems and dimmable LED lighting loads. It allows Phase dimmable products to be included and controlled as part of DMX512 installations. It also has additional 1-10V outputs for control of 1-10V loads.
COMPLIANCE & CERTIFICATION
● ● ●
RCM Compliance Mark AS/NZS60598, LM79, LM80 EMC Compliance Certification
ORDERING INFORMATION Model Number:
DMX600
DMX512 (1990)
Input Protocol: Output Protocol:
Phase Dimmable / 1-10V
Specify Output Channels: 1-4 Input Voltage Option:
90-240VAC
DMX512 / PWM / 1-10V / Phase
Control Protocols
All product details are subject to change without notice. Final specifications may vary.
toll-free: 1300 295 367 email:
mail@industralight.com.au sales reps:
mobile: 0488 839 917
mobile : 0488 844 503
RGB Lighting, Macquarie University, Sydney, Australia Industralight supplied custom made luminaires throughout the university project. Powdercoated linear lighting, track mounted spotlighting, handrail lighting and general area lighting
EWL200 LED WALL LUMINAIRE EWL200 is a stylish and contemporary wall mounted luminaire suitable for general area lighting of commercial and residential spaces. The housing is manufactured from alloy with polycarbonate visor. EWL200 works particularly well to illuminate common areas, passageways, courtyards, balconies, alfresco areas and landscape environments. ELECTRICAL PARAMETERS Input Voltage: 220-240VAC Power Consumption: 6W / 12W LED Driver Classification: Integral Constant Current Light Source Classification: Osram LED M4
DIMMING OPTIONAL
MECHANICAL SPECIFICATIONS Minimum IK Rating: IK09 IP Protection Rating: IP54 Dimensions (Small):
160x100x86mm
Construction Material: Standard Colour/Finish:
Alloy + Toughened Polycarbonate
Opal Grey / Black
Recommended Ambient Temp: -10 ~ +45°C CONFIGURATION OPTIONS ●
Customised number or signage facia available
● ●
Non standard fitting colours available by special request DALI dimmable configuration available by special request
PHOTOMETRIC INFORMATION Typical Lumen Efficacy:
90lm/W
CCT Colour Temperature: Colour Rendering (Ra): Beam Angle/Viewing Angle:
3000K / 4000K / 5000K
>80Ra
115°
CUSTOM OPTIONS This product can be customised or configured according to the needs of your project. Dimming and control options are available by special request. Control protocols include DALI, Casambi, Wireless, 1-10V, analogue dimming.
COMPLIANCE & CERTIFICATION ● IESNA2002 ● AS/NZS60598, LM79, LM80 ●
Lifespan: Exceeds 50,000hrs @ L70
ORDERING INFORMATION Model Number:
EWL200
3000K / 4000K / 5000K
Specify LED CCT:
Specify Luminaire Size: 160mm / 242mm Specify Finish/Colour: Opal Silver / Black Specify Wattage: 6W / 12W Dimming Options:
Non Dimmable / DALI / Phase Dimmable
All product details are subject to change without notice. Final specifications may vary.
toll-free: 1300 295 367 email:
mail@industralight.com.au sales reps:
mobile: 0488 839 917
mobile : 0488 844 503
Page 1 Page 2 Page 3 Page 4 Page 5 Page 6 Page 7 Page 8 Page 9 Page 10 Page 11 Page 12 Page 13 Page 14 Page 15 Page 16 Page 17 Page 18 Page 19 Page 20 Page 21 Page 22 Page 23 Page 24 Page 25 Page 26 Page 27 Page 28 Page 29 Page 30 Page 31 Page 32 Page 33 Page 34 Page 35 Page 36 Page 37 Page 38 Page 39 Page 40 Page 41 Page 42 Page 43 Page 44 Page 45 Page 46 Page 47 Page 48 Page 49 Page 50 Page 51 Page 52 Page 53 Page 54 Page 55 Page 56 Page 57 Page 58 Page 59 Page 60 Page 61 Page 62 Page 63 Page 64 Page 65 Page 66 Page 67 Page 68 Page 69 Page 70 Page 71 Page 72 Page 73 Page 74 Page 75Powered by FlippingBook