KLS200 SURFACE MOUNT LED WALL LIGHT KLS200 is an exterior wall mounted fitting with integral LED driver and SMD LED light source. The fitting is entirely surface mounted making it ideal for installation onto solid walls such as concrete or masonry. KLS200 is ideal for pathways and steplighting and can be fitted with an integral PIR sensor for a simple automation solution. ELECTRICAL PARAMETERS Input Voltage: 220-240VAC Power Consumption: 6W LED Driver Classification: Integral Light Source Classification: SMD 0.2W AC LED
DIMMING OPTIONAL
MECHANICAL SPECIFICATIONS Mounting:
Surface Mounted
IP Protection Rating: Nominal Dimensions: Construction Material: Standard Colour/Finish:
IP65
220x113x51mm
Toughened Polycarbonate
Opal Grey Recommended Ambient Temp: -10˚C - 40˚C CONFIGURATION OPTIONS ●
Non standard colours available by special request
Built-in PIR sensors available by request
●
PHOTOMETRIC INFORMATION Typical Lumen Efficacy:
85lm/W
CCT Colour Temperature: Colour Rendering (Ra): Beam Angle/Viewing Angle:
3000K/4000K/6500K
>80Ra
120˚
CONTROL OPTIONS This product can be customised or configured according to the needs of your project. Dimming and control options are available by special request. Control protocols include DALI, Casambi, Wireless, 1-10V, analogue dimming.
COMPLIANCE & CERTIFICATION ● IESNA2002 ● AS/NZS60598, LM79, LM80 ●
Lifespan: Exceeds 50,000hrs @ L70
ORDERING INFORMATION Model Number:
KLS200
3000K/4000K/6500K
Specify LED CCT: Specify PIR Sensor:
PIR (optional)
Specify Finish/Colour: Opal Grey IP Rating: IP65 Voltage Option:
240VAC / 12VDC / 24VDC
Non Dimmable / DALI / Phase / Casambi
Dimming Protocol:
All product details are subject to change without notice. Final specifications may vary.
toll-free: 1300 295 367 email:
mail@industralight.com.au sales reps:
mobile: 0488 839 917
mobile : 0488 844 503
Powered by FlippingBook