WALL LIGHTING

KLS200 SURFACE MOUNT LED WALL LIGHT KLS200 is an exterior wall mounted fitting with integral LED driver and SMD LED light source. The fitting is entirely surface mounted making it ideal for installation onto solid walls such as concrete or masonry. KLS200 is ideal for pathways and steplighting and can be fitted with an integral PIR sensor for a simple automation solution. ELECTRICAL PARAMETERS Input Voltage: 220-240VAC Power Consumption: 6W LED Driver Classification: Integral Light Source Classification: SMD 0.2W AC LED

DIMMING OPTIONAL

MECHANICAL SPECIFICATIONS Mounting:

Surface Mounted

IP Protection Rating: Nominal Dimensions: Construction Material: Standard Colour/Finish:

IP65

220x113x51mm

Toughened Polycarbonate

Opal Grey Recommended Ambient Temp: -10˚C - 40˚C CONFIGURATION OPTIONS ●

Non standard colours available by special request

Built-in PIR sensors available by request

PHOTOMETRIC INFORMATION Typical Lumen Efficacy:

85lm/W

CCT Colour Temperature: Colour Rendering (Ra): Beam Angle/Viewing Angle:

3000K/4000K/6500K

>80Ra

120˚

CONTROL OPTIONS This product can be customised or configured according to the needs of your project. Dimming and control options are available by special request. Control protocols include DALI, Casambi, Wireless, 1-10V, analogue dimming.

COMPLIANCE & CERTIFICATION ● IESNA2002 ● AS/NZS60598, LM79, LM80 ●

Lifespan: Exceeds 50,000hrs @ L70

ORDERING INFORMATION Model Number:

KLS200

3000K/4000K/6500K

Specify LED CCT: Specify PIR Sensor:

PIR (optional)

Specify Finish/Colour: Opal Grey IP Rating: IP65 Voltage Option:

240VAC / 12VDC / 24VDC

Non Dimmable / DALI / Phase / Casambi

Dimming Protocol:

All product details are subject to change without notice. Final specifications may vary.

toll-free: 1300 295 367 email:

mail@industralight.com.au sales reps:

mobile: 0488 839 917

mobile : 0488 844 503

Powered by